Help & Troubleshooting
Home Service & Support Help & Troubleshooting

Question How to install the water filter.

Answer

 Ensure no parts missing before installing.

 There are two connection parts for water filter installation, one part is connection between home water outlet and water filter, the other part is connection between water filter and water valve of refrigerator

Connection between home water outlet and water filter.

 For this part connection,it has two different connection methods because of user’s different home water tube.

Please select suitable connection methods according to your home water tube.

 

 

 Connect home water with three-way pipe and control valve(not use adaptor).

1, Put the small washer in three–way pipe.

    

2,  Connect the control valve and three –way pipe,and put the big washer into three-way pipe.

     

 3,  Cut the water pipe into two sections:water pipe A and water pipe B according to the installation position of water filter.

Insert one side of water pipe A into control valve.

      

 4, Insert a clip into clip slot.

       

5, Switch off  home water source,and connect the three –way valve to home water.

Note:Avoid leakage,please seal the connector between home water tube and three-way valve with tape

    

 Connect home water with adaptor(not use three-way pipe and control valve )

1, Switch off  home water source,and connect the adaptor to home water

    

2, Cut the water pipe into two sections:water pipe A and water pipe B according to the installation position of water filter.

Insert one side of water pipe A into the adaptor

    

Connection between water filter and water valve of refrigerator.

1, Connect the other side of water pipe A to water filter,and then install a clip.

   Note :Connect filter according to water flow arrows.

   

2, Switch on home water and clean the water filter.And then switch off.

   

3, Insert one side of water pipe B into the other side of water filter, and then install another clip.

   

4, Insert the water pipe B into the water valve of  refrigerator.

   

 Note: Only for model  HRF-628IX7/HRF-28IS7,

Water pipe from refrigerator is installed by factory default, you could insert it into water filter directly(not use water pipe B).

If the water pipe is not long enough ,you could connect it with water pipe B by connector(in the Gift Bag)

   

Content Feedback
* 1. Is this content useful ?
* 2. Please evaluate this content ?

3. Please give us some suggestion.

SUBMIT
Product guide

Need your product manual or software? You can find them here!
Service request registration

One step,our door to door service standby.