The transportation bolts are designed for damping anti-vibration components inside of the washing machine during the transportation process.
1.Remove the back cover.
2.Remove all the transportation bolts on the rear side and take out the synthetic stabilisers from within the machine.
3.Replace the back cover.
4.Fill the holes left by the bolts with blanking plugs.
1.When you replace the back cover, the convexity must face to outside, and you have to insert the back cover from the two gaps as shown in fig. 5.
2.Keep the transportation bolts and synthetic stabilisers in a safe place for later use.
Universal Access Number:
(042) 1111 42437 (Haier)
Service Time:9:30am-6:30pm (From Monday to Sunday)