Help & Troubleshooting
Home Service & Support Help & Troubleshooting

Question: Strong vibration while spinning

Answer:

 Reason 1.transportation bolts have not been removed before use.

Solution 1.Remove all transportation bolts.(Note There are normally 4 bolts, but some models have only 3 bolt)

 

1.Remove the back cover.

2.Remove all the transportation bolts on the rear side and take out the synthetic stabilisers from within the machine.

3.Replace the back cover.

4.Fill the holes left by the bolts with blanking plugs.

 

Note:

1.When you replace the back cover, the convexity must face to outside, and you have to insert the back cover from the two gaps as shown in fig. 5.

2.Keep the transportation bolts and synthetic stabilisers in a safe place for later use.

 

 

Reason 2.Washing machine is located on an uneven surface or is not level.

Solution 2.Adjust the feet to make level.

 

Reason 3.Machine load is over the rated capacity.

Solution 3.Reduce amount of laundry in the drum.

 

Related Models:
HWBD60-B1209G HWB60-B1209G HW50-1010 HW50-1010A HWD60-1403D HW70-1479 HWD80-1482 HW80-B14266A HW80-1479 HW100-1479N HW80-B14266
Content Feedback
* 1. Is this content useful ?
* 2. Please evaluate this content ?

3. Please give us some suggestion.

SUBMIT
Product guide

Need your product manual or software? You can find them here!
Repair request registration

One step,our door to door service standby.

DR. FIDO Live Chat


Your online customer care expert. Get your queries answered instantly.

9.00 AM to 9.00 PM
(Monday to Saturday)

Ask a question


Submit a question to our support team

Start now

Toll Free Hotline Number


0333 003 8122

0344 561 1234

Contact us


Submit a question to our support team

Start now

Hotline


0333 003 8122

0344 561 1234

European Hotlines