Help & Troubleshooting
Home Service & Support Help & Troubleshooting

Question: Error Code-control panel display "Err5"

Answer:

Error Message:No water entering the washing machine or the water could not reach the required water level within the required time (controlled by  PCB software ).


Reason 1. Water tap is not turned on or water pressure is too low.

Solution 1. Make sure that tap is turned on, and water pressure is normal. If the water pressure is low, wait for normal pressure to return.


Reason 2. Water inlet hose is not connected to water tap and washing machine.

Solution 2. Re-connect the water inlet hose to water tap and washing machine without any water leakage.


Reason 3. Drain hose end is lower than 80cm above the floor level. Water is draining out when at the same time the washing machine trying to fill.

Solution 3. Install drain hose to  80-100 cm above the floor level.


Reason 4. The end of drain hose is in water so the water draining out at the same time the washing machine trying to fill because of siphon effect.

Solution 4. Make sure the drain hose is not in water.


If  the error is still exist, please unplug the machine and turn the water tap off, then call for service.

Related Models:
HWBD60-B1209G HWB60-B1209G HW50-1010 HW50-1010A HWD60-1403D HW70-1479 HWD80-1482 HW80-B14266A HW80-1479 HW100-1479N HW80-B14266
Content Feedback
* 1. Is this content useful ?
* 2. Please evaluate this content ?

3. Please give us some suggestion.

SUBMIT
Product guide

Need your product manual or software? You can find them here!
Repair request registration

One step,our door to door service standby.

DR. FIDO Live Chat


Your online customer care expert. Get your queries answered instantly.

9.00 AM to 9.00 PM
(Monday to Saturday)

Ask a question


Submit a question to our support team

Start now

Toll Free Hotline Number


0333 003 8122

0344 561 1234

Contact us


Submit a question to our support team

Start now

Hotline


0333 003 8122

0344 561 1234

European Hotlines