Reason 1: Degree of pollution does not agree with selected program.
Solution 1: Select an other program.
Reason 2:Detergent quantity was not sufficient.
Solution 2: Choose the detergent acc. To the degree of pollution and acc. To manufacturer specifications.
Reason 3.Maximum load has been exceeded.
Solution 3:Reduce loading.
Reason 4: Laundry was unevenly distributed in the drum.
Solution 4: Loose the laundry.
Reason 5：The filter should be cleaned.
Solution5: Cleaning the filter.
1: Open the bottom cover.
2: Place a tray or suitable container to collect the water in the filter and drain pump. This can be as much as 500ml.
3:Pull out the rubber hose (if fitted)
4:Remove the bung from the end of the pipe.
5:Remove the filter by unscrewing it anti-clockwise.
6:Clean the filter with running water to remove any debris from the filter
7:Check the filter cavity is clear of any debris, and remove id any debris id found.
8:Refit the filter and screw in tight to avoid water leaks.
9:Refit the drain pipe bung and pipe.
10.Refit the access cover.