Step 1. turn off the tap and unplug the washing machine.
Step 2. Remove the rubber hose from its clip and stand a suitable container under it ,remove the bung to drain the water. Replace the bung and fit it back into its clip.(as shown in the picture)
Step 3. Please use a pliers to remove the white part by counterclockwise.
Different models maybe with the difference installation of rubber hose.
Step 4. Please check the white part and the knob of the filter are OK or not.
ü 1.if they are OK, please remove debris and hair pin etc. from the trap and rinse it with running water. Please push and insert the clip off black part into white part.
1.The filter must be in place, or it may lead to leakage.
2.Some models has no rubber hose, please stand a suitable container under the filter.