Question: How to dismantle the transportation bolts

Answer:

 WARNING! Ensure all electrical power is removed from the washing machine.

 

Step 1.Remove the back cover.

Step 2.Remove the transportation bolts from the back of the machine.


Note :There are normally 4 bolts, but some models have only 3 bolt.

Step 3: Remove the plastic spacers from inside the washing machine.

 Step 4:Refit the rear cover. The cover fits in the 2 slots in the back of the machine.

Step 5.Fill the holes where the bolts were removed with the plastic blanks.

Note. Keep the transit bolts and plastic spacers for refitting if you move the washing machine to a new location.

图片1.png


Need further support?
Content Feedback
* 1. Is this content useful ?
* 2. Please evaluate this content ?

Please tell us why it is not useful/satisfied:

3. Please give us some suggestion.

Submit
Copyright ©2019-2024 Haier Inc.All rights reserved