Question: How to cleaning filter?

Answer:

The filter should be removed and cleaned once a month:

1.Push a flat blade screwdriver into the slot on the filter cover and pull it open, do not use excessive force(Fig 1).

2. Remove the rubber hose from its clip and stand a suitable container under it, remove the bung to drain the water(Fig 2-3).

3.Replace the bung and fit it back into its clip(Fig 4-5).

4.Unscrew the filter and rinse it under running water, replace it and close the flap (Fig 6-7-8).

The filter must be in place, or it may lead to leakage.


Need further support?
Content Feedback
* 1. Is this content useful ?
* 2. Please evaluate this content ?

Please tell us why it is not useful/satisfied:

3. Please give us some suggestion.

Submit
Copyright ©2019-2024 Haier Inc.All rights reserved