Question: Dishwasher display code E4 (no water intake or slow water intake)

Answer:

1. Please check whether the inlet pipe of the machine is oblated or bent. If it is oblated or bent, please straighten the inlet pipe.

2. If it is not oblated or bent, please unscrew the inlet pipe and faucet interface to check whether the inlet is blocked by scale? If it is blocked, please use a brush to clean it. Be sure to tighten it clockwise after cleaning (you can use a wrench) to prevent subsequent leakage.

3. If it is not blocked, please check whether the faucet is not turned on, the water in the house is cut off, or the water pressure is too low? If the faucet is not turned on, the water is cut off, and the water pressure is low: ① If the water in the house is cut off, you can open other faucets in the house to see if there is water, and use it after the water comes in; ② The corresponding water valve of the dishwasher is not turned on, and the operation can be turned on. The water valve rotates counterclockwise to open, and clockwise to close; ③ If the water pressure is low, use it after the water pressure is normal, and fill the 500ml mineral water bottle Within 7s.

4. If the water is not cut off and the water flow and pressure are normal, a service technician will be arranged to come to your home to serve you.