Step 1. turn off the tap and unplug the washing machine.
Step 2. Remove the rubber hose from its clip and stand a suitable container under it ,remove the bung to drain the water.Replace the bung and fit it back into its clip.(as shown in the picture)
Step 3. Please use a pliers to remove the white part by counterclockwise.
Step 4. Please check the white part and the knob of the filter are OK or not.
1.The filter must be in place, or it may lead to leakage.
2.Some models has no rubber hose, please stand a suitable container under the filter.
3. Different models maybe with the difference installation of rubber hose.