Answer:
HW80-1479 for example:
1.Connect the water inlet pipe, turn on the water tap;
2.Insert the power plug into the power socket;
3.Place the height of drain pipe to 80-100cm.Too high will not drain all the water out, too low maybe draining water when filling.
4.Turn on the power switch;
5.Open the door, put the clothes into the washer, close the door, then add a proper amount of detergent into the distributor box and close the distributor box;
6.Select the desired program;
7.Select washing time, times of rinsing, spinning speed, strong wash, pre-wash, etc. as required.
8."Delay" program is off by default. To activate this program, press "Delay" button to make settings.
9.Start the selected program.
After finishing washing, the washer will automatically switch off.
DR. FIDO Live Chat
Your online customer care expert. Get your queries answered instantly.
9.00 AM to 9.00 PM(Monday to Saturday)
Toll Free Hotline Number
0333 003 8122
0344 561 1234
