Question: How can I turn the ice maker on and off ?

Models: HRF-661/662FF/A (SS) :
Switch ON/OFF the ice maker by pressing the ”Quick FRZ” and “REF TEMP” buttons simultaneously for 3 seconds. The buzzer beeps once, and the cube icon on the display panel goes off, or on when both buttons are pressed.

Models: HRF-663ITA2, HRF-663ATA2, HRF-658FF/A(SS) , HRF-663ISB2(WW), HRF-663BSS, HRF-663ASB2, HRF-661TSAA, HRF-661RSSAA, HRF-664ISB2, HRF-664ISB2*:
Switch ON/OFF the ice maker by pressing the “AI (Fuzzy )” and “Quick FRZ” buttons simultaneously for 3 seconds.

When the ice maker is switched off, the icons of cube ice and crushed ice are not displayed on the display panel.

Model: HB21F(NN) :
The ice maker is activated when power is switched on to the refrigerator. The ice maker OFF icon (J) is dark. Press the “ICE ON/OFF “button  to turn off the icemaker. The icemaker OFF icon (J) is displayed.

Models: HB21FW(NN), HB21FWRSS, HB22FWNN :

On the cabinet display control panel, press and hold the FREEZER temperature control button “>” and the REFRIGERATOR temperature control button “<” simultaneously for 3 seconds, “EXPRESS FRZ“ flashes on the cabinet display panel, then the ice maker stops operating.

To start the ice maker press and hold the FREEZER temperature control button “>” and the REFRIGERATOR temperature control button “<” simultaneously for 3 seconds.           

Models: AFD630IX, AFD633IX, AFD634CX, AFD634CW :
Press key A2 until icon J flashes. Then press button A5 to switch the ice maker ON  function. Icon J will illuminate solid. You can turn off the ice maker by repeating the above steps.

Model: AFT630IX:

The Icemaker  ON/OFF function and input water time can be controlled from the TFT display board on  the fridge door:
 Press Ice Maker— Press On button for the function—Press Quick Ice Making —（Adjust water intake time）Press up button or down button to adjust the time（time span shall be 0.5s） — Press OK button and back to secondary menu (“ice maker” icon in the tool bar disappears)

Press OFF button—off confirmation message will appear—Press YES button and back to secondary menu (“ice maker” icon in the tool bar disappears）