Reason 1.The "Start/Pause" button or program knob is not pressed or not properly set.
Solution 1.Press the "Start/Pause" button or set the program knob properly.
Reason 2.Water tap is not turned on or Water pressure is less than 0,03 MPa.
Solution 2.Turn on the water tap or check water pressure.
Reason 3.The inlet hose or inlet hose filter is kinked or blocked.
Solution 3.Check the inlet hose or inlet hose filter.
Reason 4.The washer door is not properly.
Solution 4.Close the washer door properly.