Question: Error Code- After program finish, message “H” Shows in Display and door do not open-for HWD 82 series.

Answer:

Reason: The "H" means the temperature in the drum is too hot, so the door do not open for safety.

Solution: 1.Please wait the temperature in the drum is lower than 50 ℃;

2.Or if you need the door opened urgently, please pull down the door lock rod to open the door.

Step 1: Push a flat blade screwdriver into the slot on the filter cover and pull it open, do not use excessive force.

Step 2: Please pull down the door lock rod to open the door.