Question: How to change the door opening direction of Heater Pump Dryer


These instructions are for changing the hinges from the right side to the left side. If you want to switch them back to the right side, follow the  same instructions

1. Open the door. Remove the two screws holding the door assembly to the dryer.

2. Remove the stickers and screws securing the inner door to the outer door. Remove the inner door, rotate it 180° and reinstall it into the outer door using the same screws and stickers.

3. Remove the two screws holding the strike plate and then remove one screw of the door lock, push down and take out the lock rotated 180° and install it on the opposite side.

4. Install the door assembly on the other side.


Content Feedback
* 1. Is this content useful ?
* 2. Please evaluate this content ?

Please tell us why it is not useful/satisfied:

3. Please give us some suggestion.