WARNING! Ensure all electrical power is removed from the washing machine.
Step 1.Remove the back cover.
Step 2.Remove the transportation bolts from the back of the machine.
Note :There are normally 4 bolts, but some models have only 3 bolt.
Step 3: Remove the plastic spacers from inside the washing machine.
Step 4:Refit the rear cover. The cover fits in the 2 slots in the back of the machine.
Step 5.Fill the holes where the bolts were removed with the plastic blanks.
Note. Keep the transit bolts and plastic spacers for refitting if you move the washing machine to a new location.