Question: The plastic knob of the filter has fallen off and white part remains inside machine. How can I remove it safety?

Answer:

Step 1. turn off the tap and unplug the washing machine.

Step 2. Remove the rubber hose from its clip and stand a suitable container under it ,remove the bung to drain the water. Replace the bung and fit it back into its clip.(as shown in the picture)

图片13.png

Step 3. Please use a pliers to remove the white part by counterclockwise.

图片14.png

NOTE

Different models maybe with the difference installation of rubber hose.

图片15.png

Step 4. Please check the white part and the knob of the filter are OK or not.

ü 1.if they are OK, please remove debris and hair pin etc. from the trap and rinse it with running water. Please push and insert the clip off black part into white part.

图片16.png


ü 2.If they are not OK, please contact the call center, they will arrange the service manager to visiting service.

NOTE

1.The filter must be in place, or it may lead to leakage.

2.Some models has no rubber hose, please stand a suitable container under the filter.


Need further support?
Content Feedback
* 1. Is this content useful ?
* 2. Please evaluate this content ?

Please tell us why it is not useful/satisfied:

3. Please give us some suggestion.

By providing your email address or phone number, we may use it to contact you regarding your question and gain further feedback.

Tel / Mobile:  
Submit
Copyright ©2019-2020 Haier Inc.All rights reserved