Question: How to change the door opening direction of Heater Pump Dryer


These instructions are  for changing the hinges from the right side to the left side. If you  want to switch them back to the right side, follow the  same  instructions

1. Open the door. Remove the two screws holding the door assembly to the dryer.

2.  Remove the stickers and screws securing the inner door to the outer  door. Remove the inner door, rotate it 180° and reinstall it into the  outer door using the same screws and stickers.

3.  Remove the two screws holding the strike plate and then remove one  screw of the door lock, push down and take out the lock rotated 180° and  install it on the opposite side.

4. Install the door assembly on the other side.


Need further support?
Content Feedback
* 1. Is this content useful ?
* 2. Please evaluate this content ?

Please tell us why it is not useful/satisfied:

3. Please give us some suggestion.

Copyright ©2019-2024 Haier Inc.All rights reserved