Question: How to clean the filter? - FL WM

Answer:

It is recommended to clean the filter once a month:

1. Push a flat blade screwdriver into the slot on the filter cover and pull it open, do not use excessive force(Fig 1).

2. Remove the rubber hose from its clip and stand a suitable container under it, remove the bung to drain the water(Fig 2-3).

3. Plug the bung and fit it back into its clip(Fig 4-5).

4. Unscrew the filter and rinse it under running water. Then assemble it in place and close the filter cover (Fig 6-7-8).

The filter must be installed in place, or it may lead to leakage.