Question: How to dismantle the transportation bolts - FL WM

Answer:

WARNING: Ensure all electrical power is removed from the washing machine.

Step 1: Remove the back cover.

image.png

Step 2: Remove the transportation bolts from the back of the machine.

             Note :There are normally 4 bolts, but some models have only 3 bolt.

image.png

Step 3: Refit the rear cover. The cover fits in the 2 slots in the back of the machine.

image.png

Step 4: Fill the holes where the bolts were removed with the plastic blanks.

             Note: Keep the transit bolts and plastic spacers for refitting if you move the washing machine to a new location.


image.png


Need further support?
Content Feedback
* 1. Is this content useful ?
* 2. Please evaluate this content ?

Please tell us why it is not useful/satisfied:

3. Please give us some suggestion.

Submit
Copyright ©2019-2024 Haier Inc.All rights reserved