1.Only for cooling or automode(other modes cannot be implemented).
2.Place the remote controller within the acceptable range of AC.Press
the I FEEL button ,the remote control displays the “I FEEL”icon.
The remote controller sends the circulation temperature date to the
PCB every 3 minutes, and the AC runs according to this data.
3.Exit “I FEEL” mode when power off or press the “I FEEL” button or
switch other modes.
4.The function optimizes the working conditions of AC to deliver airflow
at the best temperature that you need.
5.Remote Controller Perceive Temperature
With a temperature sensor inside the remote controller, I- FEEL function enables the air conditioner to operate according to the ambient temperature around the remote controller.
