Question: How to connect the drain hose of Heater Pump Dryer

Answer:

The dryer is equipped with a condenser unit which accumulates water during the drying cycle. This water is collected in removable water tank located at the top left of the dryer. The accumulated water must be emptied after each drying cycles, or you can drain to the sewer by using the drain hose provided.

How to connect the drain hose:

1. Remove the black hose from the connection at the back of the dryer.

2. Connect the hose to the drainage hose that provided with the machine.

3. Place the other end of the drainage hose into sink or sewer.

Question: How to connect the drain hose of Heater Pump Dryer

Tips