Question: Door is not tight.

          Feature :

                1, Door seal corners tilt  upwards slightly.

    2, Door seals have smaller magnetic force.

Answer :

 1,Door seal corners tilt  upwards slightly

     Check  1.if there is a gap between the door seals and cabinet

                 2. The doors are  sealed properly, we mainly observe if the door seals are airtight.

Common method: place one coin between the door seal and the cabinet, if the coin does not slide down, the door seal is normal.

Attractive  force of door seals is generated by the magnetic bars inside seals and  the cabinet. However, the magnetic bars inside the seals are not  integrated along the four sides, especially at the joints. The joints  are welded together and there is no magnetic bar inside the welded  corners. So maybe the corners tilt  upwards slightly, it does not affect the sealing performance of the door seals. Please don't worry about it.

2,Door seals have smaller magnetic.

It is not correct to think that the more attractive force the door seal owns,  the better it is. With increase of the attractive force, the pull force  needed to open the door will increase and the deformation of the door  seal will also increase. This will shorten the seals' life. So in  production we adjust the door seal's attractive force reasonably while  ensuring their tightness.

If there is a gap between the door seals and cabinet, please call a service