Question: The water inlet hose leaking.

Reason 1： Connection between water inlet hose and the washer

Solution 1：

1.Do not take off the water absorption cushion. Please check if the cushion id dropped or damaged before each usage. If it happens please contact our after-sale department immediately.

2.Put the nut of the water inlet hose on the valve jointer.

3.Fasten the nut. Swing it gently to confirm if it is suitable.

Reason 2： Connection between the jointer of the water inlet hose and the water inlet hose

Solution 2：

1.Push down the slider. Insert the water inlet hose into the jointer.

2.Hang the lock lever to the jointer. Release the slider till a click sound is heard

Reason 3:Check the connection between the jointer of the water inlet hose and the water faucet

Solution 3:

1.Swing the hose gently to confirm if it is fastened stable.

2.After installation, open the faucet to check if it leaks.

3.Do not bend the hose with overstrain.

4.Before each usage please check if the connection between the jointer of the water inlet hose and theproper installation position. Water faucet and the installation of the water inlet hose are firm, so as to prevent dropping.

Reason 4:Dismantle the water inlet hose

Solution 4:

1.Close the water faucet.

2.Press the locking lever. Push down the slider. Then pull off the water inlet hose. If the machine is used frequently. The jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw.

If problem is not solved, please contact our cell center for service.