Question: Activate or deactivate the buzzer for model HW80-IM12929CS3 SKD


The acoustic signal can be deselected if necessary:
1. Switch on the appliance.
2. Select the Self Clean programme.
3. Press the “Extra rinse” button, “Temp.” button and “Steam” button at the same time
for about 3 seconds. “beep off ” will be displayed and the buzzer will be deactivated.

For activating the buzzer, press these three buttons at the same time again, then “beep on” will be displayed.

Content Feedback
* 1. Is this content useful ?
* 2. Please evaluate this content ?

Please tell us why it is not useful/satisfied:

3. Please give us some suggestion.

Copyright ©2012-2024 Haier Inc.All rights reserved