Question: How to dismantle the transportation bolts of Drum Washing Machine

WARNING: Ensure all electrical power is removed from the washing machine.

Step 1: Remove the back cover.

Step 2: Remove the transportation bolts from the back of the machine.

             Note :There are normally 4 bolts, but some models have only 3 bolt.

Step 3: Refit the rear cover. The cover fits in the 2 slots in the back of the machine.

Step 4: Fill the holes where the bolts were removed with the plastic blanks.

             Note: Keep the transit bolts and plastic spacers for refitting if you move the washing machine to a new location.