Troubleshooting

Home > Service & Support > Troubleshooting > How to set the temperature for the side by side or T doors refrigerator
Question: How to set the temperature for the side by side or T doors refrigerator
Answer:

Normal control process: Press the lock button, you can unlock the panel. When you press the fridge or freezer temperature adjustment key, the characters in the fridge or freezer temperature display zone will flash. At this time you can adjust the temperature of the fridge/freezer storage compartment. After adjustment, if there is no key action in 5 seconds, the displayed value will stop flashing and return to original value to display actual temperature of the fridge/freezer storage compartment.
Because different control process for different models, please set the temperature refer to the user manual.

The ideal temperature setting: Fridge is 5℃ and  freezer is -18 ℃

If you put the vegetables ,fruits or eggs in the fridge , you can set 5℃, if you set other food, you can set the temperature refer to the temperature that it should be stored.

If you set much fresh meat , fish or much ice-cream in the freezer, you can using the super freeze function, otherwise, set freezer -18 ℃.



1.HRF-622 series


图片20200619173106




2.HRB-738GG


图片20200619173106


Because there are many kinds of models for Haier products,  maybe you can't set the temperature refer to the FAQ. Maybe the display panel is not the same as the contents and the picture, please search the user manual from the website first , if  you can't find it, please call Haier service center.


Content Feedback
Yes No
My problem was not resolved, need service Product quality or performance My question is not listed There is no answer that I needed The language and sentences are poor Web page error or no link
5 (Very satisfied) 4 (Satisfied) 3 (Neutral) 2 (Dissatisfied) 1 (Very Dissatisfied)
My problem was not resolved, need service Product quality or performance My question is not listed There is no answer that I needed The language and sentences are poor Web page error or no link
Need Further Support?