Question: How to take the ice-box out?

Background: when you want to clean the ice crushed box or check if there is ice in box, you  should dismantle and install the ice crushed box.

Reason analysis:

To make the ice crushed box fix on cabinet tightly, there is two grooves (Picture 1) on left and right side to match the flange (Picture 2).

See below picture 3: step 1, lift up from bottom till the top of box touch the cabinet slight.

   Step 2: pull the box out and make the box touch the cabinet slight.

caution

1, When users clean the ice crushed box, don’t make the arm touch the hard board to avoid the arm deformation. (see picture 5)

2, When installing, the crushed motor rotator (picture 7) should match with crushed box knob. (Picture 6) otherwise,

    the box cannot be installed properly.

3, When installing, the arm of crushed box should insert into hole of crushed motor. (Picture 8) otherwise, there would be no

    ice cube out.