Question: How to clean the filter?


 Step 1: Open the bottom cover.

 Step 2: Place a tray or suitable container to collect the water in the filter and drain pump. This can be as much as 500ml.

 Step 3:Pull out the rubber hose (if fitted)

 Step 4:Remove the bung from the end of the pipe.


Step 5:Remove the filter by unscrewing it anti-clockwise.

Step 6:Clean the filter with running water to remove any debris from the filter

Step 7:Check the filter cavity is clear of any debris, and remove id any debris id found.

 Step 8:Refit the filter and screw in tight to avoid water leaks.

Step 9:Refit the drain pipe bung and pipe.

Step 10.Refit the access cover.

Content Feedback
* 1. Is this content useful ?
* 2. Please evaluate this content ?

Please tell us why it is not useful/satisfied:

3. Please give us some suggestion.

By providing your email address or phone number, we may use it to contact you regarding your question and gain further feedback.

Tel / Mobile:  
Copyright ©2011-2022 Haier Inc.All rights reserved