Question: Washing sequence -


1.Inlet selector

(1)Set the selector to “WASH”. Figure 1
(2)Adjust the water level to a position as needed.

2. Add water and dissolved powder detergent until the water reaches a suitable level.

Machine begins to dispense detergent uniformly.

3.Put in the wash load. Add more water as necessary.

4. Select intensity.

Select “STRONG ” or “STANDARD ” water flow intensity according to the wash load.(Figuer3)

5. Select wash time.

Select wash time according to the wash load.(Figure4)

6. After the wash is completed, set the switch to the “DRAIN ” position.(Figure5)

Content Feedback
* 1. Is this content useful ?
* 2. Please evaluate this content ?

Please tell us why it is not useful/satisfied:

3. Please give us some suggestion.