Question: AC- window how to timer on/off?

Answer:

With this function, unit will start or stop at the time you want.

1.Start unit and select desired operation mode.

2.Select Timer function:Timer On or Off stop mode is used to preset or shut off your unit in advance .You can program this up to 24 hours in advance. You can use the Timer in 3 function i.e Cool Dehumid or Fan only. Selected desired mode. (TIMER On or Off stop )

TIME ON

Unit must be on to set the timer. Unit will shut down automatically after it accepts the setting in 5 seconds. Use this mode to preset the start time of the unit 24 hours in advance .

a) Press “On” of remote controller or “TIMER” of control panel,LED display will show “01”.(Electrify for the first time)

b) Set desired number by pressing the (▲)pad of the Temp/Time buttons. One for each hour . If you passed the desired time use the (▼) pad key to lower the selection.

Timer Off

Unit must be running to set the timer off. Use this to preset the time you would like the unit to shut off.

a) Press “off” of remote controller or “TIMER”of control panel,LED display will show “01”.(Electrify for the first time)

b) Set desired number by pressing the () pad of he Temp/Time buttons. One for each hour . If you passed the desired time use the () pad key to lower the selection.When using the timer the unit will use/revert to the last A/C , fan settings when activated . The timer must be reset every time you choose to use it .


Content Feedback
* 1. Is this content useful ?
* 2. Please evaluate this content ?

Please tell us why it is not useful/satisfied:

3. Please give us some suggestion.

By providing your email address or phone number, we may use it to contact you regarding your question and gain further feedback.

Tel / Mobile:  
Submit
Copyright ©2012-2024 Haier Inc.All rights reserved