In following cases an acoustic signal sounds:

•     When pressing a button

•     At the end of program

•     When selecting the program in case of failures

Activate or deactivate the buzzer:

The acoustic signal can be deselected if necessary:

1. Switch on the appliance.

2. Select the Drum Clean programme.

3. Press the “Dry” button,  “Temp” button and “Extra Rinse” at the same time for about 3 seconds. “ bEEP OFF ” will be displayed and the buzzer will be deactivated.

For activating the buzzer press these three buttons at the same time again, then “bEEP ON” will be displayed.

Control Panel of HWD105-BP14929AS8 :