Troubleshooting

Home > Service & Support > Troubleshooting > Lint filter care & cleaning instruction for model HD90-A2979

Question: Lint filter care & cleaning instruction for model HD90-A2979

Answer:

Notice：1. Turn off the power

2. Clean the lint filter and condenser filter after each dry cycle.

Step1：Remove the lint filter from the drum.

Step2：Open and clean the lint filter.

Notice：If the lint filter is very dirty, it can be cleaned under running water. Let it dry thoroughly before use.

Step3：Press the handle of condenser filter and pull it up from the front support.

Step4： Clean the outside, if it very dirty it can be cleaned inside of the condenser filter.

Notice：If the condenser filter is very dirty, it can be cleaned under running water. Let it dry thoroughly before use.

Step5：Reinstall the condenser filter and lint filter.

Content Feedback

Yes

My problem was not resolved, need service

Product quality or performance

My question is not listed

There is no answer that I needed

The language and sentences are poor

Web page error or no link

5 (Very satisfied)

4 (Satisfied)

3 (Neutral)

2 (Dissatisfied)

1 (Very Dissatisfied)