Troubleshooting

Home > Service & Support > Troubleshooting > How to dismantle the transportation bolts?
Question: How to dismantle the transportation bolts?
Answer:

 The transportation bolts are designed for damping anti-vibration components inside of the washing machine during the transportation process.

 1.Remove the back cover.

2.Remove all the transportation bolts on the rear side and take out the synthetic stabilisers from within the machine.

3.Replace the back cover.

4.Fill the holes left by the bolts with blanking plugs.

 

Note:

1.When you replace the back cover, the convexity must face to outside, and you have to insert the back cover from the two gaps as shown in fig. 5.

2.Keep the transportation bolts and synthetic stabilisers in a safe place for later use.

Content Feedback
Yes No
My problem was not resolved, need service Product quality or performance My question is not listed There is no answer that I needed The language and sentences are poor Web page error or no link
5 (Very satisfied) 4 (Satisfied) 3 (Neutral) 2 (Dissatisfied) 1 (Very Dissatisfied)
My problem was not resolved, need service Product quality or performance My question is not listed There is no answer that I needed The language and sentences are poor Web page error or no link
Need Further Support?