Troubleshooting

1.Only for cooling or automode(other modes cannot be implemented).

2.Place the remote controller within the acceptable range of AC.Press

the I  FEEL  button ,the remote control displays the “I FEEL”icon.

The remote controller sends the circulation temperature date to the

PCB every 3 minutes, and the AC runs according to this data.

3.Exit “I FEEL” mode when power off or press the “I FEEL” button or

switch other modes.

4.The function optimizes the working conditions of AC  to deliver airflow

 at the best temperature that you need.

5.Remote Controller Perceive Temperature

With a temperature sensor inside the remote controller, I- FEEL function enables the air conditioner to operate according to the ambient temperature around the remote controller.