Search History
Troubleshooting
Home
>
Service & Support
>
Troubleshooting
>
What causes reduced hot water flow from an instant electric water heater, and how to fix it?
Question:
What causes reduced hot water flow from an instant electric water heater, and how to fix it?
Answer:
1、Clogged filter screens
Impurities and limescale accumulate on the filter screens of the flow control valve and water inlet, restricting water flow. Regularly remove and clean the filters to restore normal water output.
2、Multiple water outlets in use at the same time
Simultaneous use of multiple faucets and showers causes water diversion and lower flow. It is recommended to use only one water point at a time and fully open the inlet flow control valve.
3、Low inlet water pressure
High-rise buildings or self-built houses with insufficient water tank height difference suffer from weak water pressure. Raise the water storage tank to increase height difference or install a booster pump for improvement.
4、Unreasonable pipeline layout
Excessively long water pipes, numerous bends and thin pipe diameters increase water inlet resistance. Simplify the pipeline layout, reduce pipe bends, and replace with thicker water pipes if necessary.
5、Incompletely opened inlet valve
Fully closed main water valve or angle valve causes flow restriction. Turn the valve handle fully open to the 90° maximum position.
6、Flow-limiting shower accessories
The flow restrictor gasket installed at the shower connector further reduces water flow in low water pressure households. Remove the restrictor gasket to increase water flow.
7、Blockage by water source impurities
Self-built water tanks and old pipelines tend to deposit sediment and dirt, blocking the water inlet. Clean the water tank regularly and flush the entire inlet pipeline.
Content Feedback
Need Further Support?